The new minimicronizer LAB-50 is the latest development of micromacinazione for solving in the most economical way the
problem of processing small amount of powder with a high performance Chrispro® Jet-Mill.
The main features are summarized here below:
New pneumatic doublescrew feeder.
Jet-mill special execution (teflon + inox) with a reduced number of items.
Static cyclon classifier disassemble in two parts via a 6" clamp connection.
Outlet absolute filter EU13 (economic replacement of the filter element).
Clamp connections.
The main advantages are:
No electrical components, with consequent reduction of explosion risk.
Economic replacement of the lining internal parts.
No need of a pre filtering-element.
flexibility of positioning (for example over a table).
Easy to use: only 3 pressure regulators to control the process.
Very high micronization performance.
Easy to clean due to a reduced number of items.
The unit was developped entirely by the internal project department of Micromacinazione (ISO 9001).
The item is supplied with an instruction book, instructions for micronization, test certification and CE conformity
declaration.
Technical details of the Lab 50
Dimensions (L x B x H)
500 x 600 x 1105 mm
Supporting structure
Aluminium fine polished
Parts in contact with product
AISI 316 L electropolished*
Noise level at 1 mt:
68 dbA
Pneumatic feeder
0,05 ÷ 0,13 kW
Total weight
34 kg
* Mirror polished upon request.
Technical details of the Micronizer MC 50 IR
Diameter of grinding chamber
2 1/2" inches
Air consumption at 7 bar
0,41 Nm3 / min.
Weight
5,7 kg
Central body dimension
ø = 160 mm; h = 45 mm
Micronized material outlet
Bottom discharge (BD)
Number of grinding nozzles
6
Nozzles angles
from 19° to 44°
Material
AISI 316 L, mirror polished 320 GRIT
Covering
Teflon (PTFE)
Initial granulometry Max.
500 µm
Final fineness
0.5 ÷ 10 µm*
Feed-rate
0,05 ÷ 1 kg/h*
* The feed-rate and the final fineness aboveall on the characteristics of the product to micronize.
We are glad to announce that recently (28-30 March 2012) we passed a 3-day FDA inspection successfully
at both our manufacturing sites, Molinazzo di Monteggio and Madonna del Piano, without any observation.
