Micronizer of 12", top discharge of micronized product, grinder ring in which it is possible to install different
sets of nozzles with variable angles. Material AISI 316 L. Mirror polished. It is possible to use different covering
material for the parts which are in contact with the powder (Inox, Teflon, Peek, Poliuretane, Borcarbide,…)
A double screw feeder with a direct corrent motor with electronic speed adjustament, mounted on a stainless
steel support.
Completed with a stainless steel container of 15 litres, protection net and a closure cover.
Silencer connected to the double screw feeder.
Cyclon filter with 12 hoses in AISI 304 mirror polished which permits the recovery of the micronized powder
coming out of the Jet-mill.
Complete with an inspection door for an easy substitution of the filtering elements.
Connection tube in SBR-NBR between micronizer and filter, ø 150 mm.
Pneumatic installation with pressure regulators and manometers fitted on pneumatic table, Inox rapid
connection and Inox/Teflon flexible tubing.
Cabled and assembled Electric Panel.
Technical details of the Micronizer
Diameter of grinding chamber
12 inches (300 mm)
Air consumption at 7 bar
6,5 Nm³ / min.
Weight
107 kg
Central body dimension
ø = 465 mm; h = 95 mm
Micronized material outlet
Top discharge (TD)
Number of grinding nozzles
8
Nozzles angles
from 19° to 44°
Material
AISI 316 L, mirror polished 320 GRIT
Covering
Teflon (PTFE)
Initial granulometry Max.
1 mm
Final fineness
0.5 ÷ 10 µm*
Feed-rate
5 ÷ 100 kg/h*
* The feed-rate and the final fineness aboveall on the characteristics of the product to micronize.
