Micronizer of 8"’, bottom discharge of micronized product, grinder ring in which it is possible to install
different sets of nozzles with variable angles. Material AISI 316 L. Mirror polished. It is possible to use different
covering material for the parts which are in contact with the powder (Inox, Teflon, Peek, Poliuretane, Borcarbide,…)
A double screw feeder with a direct corrent motor with electronic speed adjustament, mounted on a stainless steel
support.
Complete with 2 HD-PE 25 l containers.
Silencer connected to the double screw feeder.
Cyclon filter with 7 hoses in AISI 304 mirror polished which permits the recovery of the micronized powder entered
from the Jet-mill.
Complete with an inspection door for an easy replacement of the filtering elements.
Connection tube in AISI 316 L between micronizer and filter, ø 100 mm. Clamp connections including an inspection
glass.
EU 15 outlet absolute filter.
Pneumatic installation with pressure regulators and manometers fitted on pneumatic table, Inox rapid connection
and Inox/Teflon flexible tubing.
Cable and assembled Electric Panel.
The item is supplied with an instruction book, instructions for micronization, test certification and CE conformity
declaration.
Technical details of the Micronizer
Diameter of grinding chamber
8 inches (200 mm)
Air consumption at 7 bar
3,1 Nm³ / min.
Weight
50 kg
Central body dimension
ø = 340 mm; h = 77 mm
Micronized material outlet
Bottom discharge (BD)
Number of grinding nozzles
8
Nozzles angles
from 19° to 44°
Material
AISI 316 L, mirror polished 320 GRIT
Covering
Teflon (PTFE)
Initial granulometry Max.
1 mm
Final fineness
0.5 ÷ 10 µm*
Feed-rate
1 ÷ 30 kg/h*
* The feed-rate and the final fineness aboveall on the characteristics of the product to micronize.
